Painted 1 3/4" Round Trailer Axle - 2,000 lbs. Capacity with 1" Spindles - 72" Hub Face

In stock

SKU 76A
Price $149.00
Item 76A
Approximate Overall Length 76 1/2"
Hub Face 72"
Capacity 2,000 lbs.
Brand Tie Down Engineering
Manufacturer Product # 49951- TILL SUPPLY LASTS

Customizable Options:

Description / Painted 1 3/4" Round Trailer Axle - 2,000 lbs. Capacity with 1" Spindles - 72" Hub Face

The 76A replacement trailer axle by Tie Down Engineering/Dexter Marine (manufacturer part number 49951) has a 1 3/4" beam that is finished in a black powder coating to help resist rust and corrosion. The 2,000 lbs. capacity is perfect for light duty utility applications. The straight spindles feature pressed stainless steel wear rings and come with axle nuts, washers, and cotter pins. This axle will come with spring seats loose unless welding is requested. A slight bend in the beam, otherwise known as a camber, will straighten out under trailer load and help provide even tire tread wear. The spring seats must be welded before installation and the axle must be installed with the camber arc facing up towards the trailer.

 

Product Features:

  • Black powder coat finish
  • Includes 2 castellated nuts, 2 washers, and 2 cotter pins
  • Non-lube spindles
  • Comes with spring seats loose unless otherwise specified (welding is extra)
  • No flanges for brake mounting
  • Should not be used with rims exceeding 13"
  • Slight camber present in axle beam
  • Hubs sold separately

 

Product Specifications:

  • Capacity: 2,000 lbs.
  • Hub Face Measurement: 72"
  • Overall Length: 76.5"
  • **Spring Center Range: 56" - 62"
  • Beam: 1 3/4" Round
  • Spindle: 1" straight

 

**The spring center range is measured from the center of one spring or spring seat to the center of the opposite spring or spring seat.

 

Hardware Information:

  • Inner/Outer Bearings (sold separately): 44643 (1" inner dimension)
  • Grease Seal Inner Diameter: 1.25"

 

NOTE: We will only weld within the recommended spring center range provided by the manufacturer. Going inside or outside of this range may cause the strength of the axle to lessen or even cause a complete axle failure. Welded axles are non-returnable for any reason. When installing the axle, make sure that the camber bow is pointing up. This camber is designed to deflect the weight of the load once weight is applied to the trailer, essentially straightening out the axle to prevent uneven tire tread wear.

 

Tie Down Engineering/Dexter Marine of Georgia Part Number: 49951

Related Products

Fits 1 3/4" Round Axle - Trailer U-Bolt Kit - U-Bolts Zinc Plated - Plates Raw
$19.50
4 Bolt on 4" Trailer Hub with 1" Bearings (L44643)
$32.14
5 Bolt on 4 1/2" Trailer Hub with 1" Bearings (L44643)
$39.65
5 Bolt on 4 1/2" Large Flange Trailer Hub with 1" Bearings (L44643)
$42.71