Painted 3" Round Trailer Axle - 6,000 lbs. Capacity with 1 3/4" x 1 1/4" Spindles - 4" Drop - 94.25" Hub Face

In stock

SKU 46100A
Price $582.00
Item 46100A
Approximate Overall Length 100 1/2"
Hub Face 94 1/4"
Capacity 6,000 lbs.
Brand Tie Down Engineering
Manufacturer Product # 49942

Customizable Options:

Description / Painted 3" Round Trailer Axle - 6,000 lbs. Capacity with 1 3/4" x 1 1/4" Spindles - 4" Drop - 94.25" Hub Face

The 46100A axle by Tie Down Engineering/Dexter Marine (manufacturer part number 49942) features 4" drop spindles and boasts a 6,000 lbs. weight capacity. When installed, drop axles will lower the deck of a trailer. The axle beam has a black powder coat finish to resist corrosion and the spindles have pressed stainless steel wear rings for a tight grease seal fit. Zerk fittings on the EZ Lube spindles allow for fast and simple bearing greasing when combined with EZ Lube caps and a grease gun. A slight bend in the axle beam, called a camber, must be installed with the arc pointing up to achieve the full strength of the axle. This bend will straighten out once weight is applied to create even tire tread wear. The axle includes two loose spring seats and mounted spindle hardware.

 

Product Features:

  • Black powder coat finish
  • Includes 2 castellated nuts, 2 washers, and 2 cotter pins
  • Zerk fitting at end of spindles for simple bearing lubrication
  • Fitting allows greaste to easily flow to both the inner and outer bearings for a complete repack while purging old grease without removing the hub
  • To be used with EZ-Lube caps
  • Comes with spring seats loose unless otherwise specified (welding is extra)
  • Seats must be welded to the axle beam prior to installation
  • Slight camber built into axle beam
  • Used for leaf spring suspension systems
  • 5-hole flanges for brake mounting
  • Hubs/drums sold separately

 

Product Specifications:

  • Capacity: 6,000 lbs.
  • Hub Face Measurement: 94.25"
  • Flange to Flange Measurement: 85.5"
  • Overall Length: 100.5"
  • **Spring Center Range: 75.25" - 76.5"
  • Beam: 3" Round
  • Spindle: 1 3/4" x 1 1/4" flared
  • Spindle Drop Distance: 4"
  • Standard 5 hole flanges

 

**The spring center range is measured from the center of one spring or spring seat to the center of the opposite spring or spring seat.

 

Hardware Information:

  • Inner Bearing (sold separately): 25580 (1 3/4" inner diameter)
  • Outer Bearing (sold separately): 15123, 67048, 14125 (1 1/4" inner diameter)
  • Grease Seal Inner Diameter: 2.25"

 

NOTE: We will only weld within the recommended spring center range provided by the manufacturer. Going inside or outside of this range may cause the strength of the axle to lessen or even cause a complete axle failure. Welded axles are non-returnable for any reason. When installing the axle, make sure that the camber bow is pointing up. This camber is designed to deflect the weight of the load once weight is applied to the trailer, essentially straightening out the axle to prevent uneven tire tread wear.

 

Tie Down Engineering/Dexter Marine of Georgia Part Number: 49942

Related Products

Fits 3" Round Axle - Trailer U-Bolt Kit - 9/16" Diameter U-Bolts
$30.75
6 Bolt on 5 1/2" Trailer Hub with 1 3/4" x 1 1/4" Bearings (25580 x 15123)
$71.10
Dexter 12" x 2" Brake Drum - 6 on 5 1/2" with 1 3/4" x 1 1/4" Bearings (25580 x 15123) - 1/2" Studs
$136.90
Dexter 12" x 2" Brake Drum - 8 on 6 1/2" with 1 3/4" x 1 1/4" Bearings (25580 x 14125A) - 1/2" Studs
$154.11
Dexter 12" x 2" Electric Trailer Brake Kit - Left & Right Hand Assemblies - 6,000 lbs. Axle Capacity
$181.70
Dexter Nev-R-Adjust 12" x 2" Electric Brake Kit - Left & Right Hand Assemblies - 7,000 lbs. Axle Capacity
$308.29
Tie Down Engineering 12" Single Axle Disc Brake Kit - 6 on 5 1/2" - Galv-X Coated Rotors
$1,086.16