Painted 2 3/8" Round Trailer Axle - 3,500 lbs. Capacity with 1 3/8" x 1 1/16" Spindles - 70" Hub Face

In stock

SKU 3575A
Price $203.67
Item 3575A
Approximate Overall Length 74 1/2"
Hub Face 70"
Capacity 3,500 lbs.
Brand Tie Down Engineering
Manufacturer Product # 49931

Customizable Options:

Description / Painted 2 3/8" Round Trailer Axle - 3,500 lbs. Capacity with 1 3/8" x 1 1/16" Spindles - 70" Hub Face

The 3575A axle by Tie Down Engineering/Dexter Marine (manufacturer part number 49931) has a 3,500 lbs. capacity with a black powder coat finish to help protect against the elements. The axle comes with two loose spring seats, axle nuts, washers, and cotter pins. The spindles feature pressed stainless steal wear rings and grease zerk fittings for convenient bearing greasing. A slight bend in the axle, called a camber, should always be installed with the arc pointing up.

 

Product Features:

  • Black powder coat finish
  • Includes 2 castellated nuts, 2 washers, and 2 cotter pins
  • Zerk fitting at end of spindles for simple bearing lubrication
  • Fitting allows grease to easily flow to both the inner and outer bearings for a complete repack while purging contaminated grease without removing the hub
  • To be used with EZ-Lube caps
  • Comes with spring seats loose unless otherwise specified (welding is extra)
  • Seats must be welded to the axle beam prior to installation
  • Slight camber built into axle beam
  • Used for leaf spring suspension systems
  • 4-hole flanges for brake mounting
  • Hubs/drums sold separately

 

Product Specifications:

  • Capacity: 3,500 lbs.
  • Hub Face Measurement: 70"
  • Flange to Flange Measurement: 63.75"
  • Overall Length: 74.5"
  • **Spring Center Range: 51" - 58"
  • Beam: 2 3/8" Round
  • Spindle: 1 3/8" x 1 1/16" flared
  • Flange Hole Distance: 2 7/8" center-to-center

 

**The spring center range is measured from the center of one spring or spring seat to the center of the opposite spring or spring seat.

 

Hardware Information:

  • Inner Bearing (sold separately): 68149 (1 3/8" inner diameter)
  • Outer Bearing (sold separately): 44649 (1 1/16" inner diameter)
  • Grease Seal Inner Diameter: 1.72"

 

NOTE: We will only weld within the recommended spring center range provided by the manufacturer. Going inside or outside of this range may cause the strength of the axle to lessen or even cause a complete axle failure. Welded axles are non-returnable for any reason. When installing the axle, make sure that the camber bow is pointing up. This camber is designed to deflect the weight of the load once weight is applied to the trailer, essentially straightening out the axle to prevent uneven tire tread wear.

 

Tie Down Engineering/Dexter Marine of Georgia Part Number: 49931

Related Products

Fits 2 3/8" Round Axle - Trailer U-Bolt Kit - U-Bolts Zinc Plated - Plates RAW
$32.70
5 Bolt on 4 1/2" Trailer Hub with 1 3/8" x 1 1/16" Bearings (L68149 & L44649)
$54.70
Dexter 10" x 2 1/4" Brake Drum - 5 on 4 1/2" with 1 3/8" x 1 1/16" Bearings (L68149 x L44649) - 1/2" Studs
$92.76
Dexter Marine/Tie Down Engineering 9.6" Integral Disc Brake Assembly - 5 on 4 1/2" - Galv-X Coated Rotors
$258.81
Tie Down Engineering 9.6" Single Axle Disc Brake Kit - 5 on 4 1/2" - Galv-X Coated Rotors
$906.59